• 
• 
• 
• Browse by Subjects
• Publications A-Z index

1.

Manifold Technology in the Offshore Industry Karan Sotoodeh American Journal of Marine Science. 2020 8 (1). doi: 10.12691/marine-8-1-3 Keywords: manifold, manufacturing process, material selection, welding, oil and gas, offshore Context: ...o the vertical line. The advantages of narrow gap welding include using less weld electrodes, a faster welding process, and less heat input . This paper presents a method for calculating welding consumables volume and weight in one meter. The result shows that the amount... Abstract Full Text (PDF) [Epub] Full Text (HTML)

2.

Microstructural Transformations of Dissimilar Austenite-Ferrite Stainless Steels Welded Joints Sara Aguilar, Ramón Tabares, Claudia Serna Journal of Materials Physics and Chemistry. 2013 1 (4). doi: 10.12691/jmpc-1-4-2 Keywords: stainless steels welding, SMAW, welding metallurgy, austenitic stainless steel, ferritic stainless steel Context: ...inless steels 3.2 mm diameter, were used to perform the study. The joining was made with a single pass welding and keeping a low heat input ranging from 700 - 1000 J/mm. The influence of the type of electrode and the heat input on the microstructural evolution of the he... Abstract Full Text (PDF) [Epub] Full Text (HTML)

3.

An Investigation into Effect of Butt Welding Parameters on Weldment Mechanical Properties A. Hemaid, Tarik Tawfeek, O. A. Gaheen American Journal of Mechanical Engineering. 2016 4 (3). doi: 10.12691/ajme-4-3-2 Keywords: Wire feed rate, Welding speed, Interpass temperature, Arc voltage, HAZ, Gas Metal Arc Welding (GMAW) Context: ... the steel butt-welding joints in the multiple pass welding process by means of the practically measurements. Also the effect of heat input which presented by the welding process variables on the mechanical properties of the welded joints has been investigated to reach ... Abstract Full Text (PDF) [Epub] Full Text (HTML)

4.

Experimental Investigation on Thermal Performance of a Closed Loop Pulsating Heat Pipe without Fin and with Fin Structure Md. Lutfor Rahman, Md. Faisal Kader, Md. Zakaria Rahman, M. Ali American Journal of Mechanical Engineering. 2016 4 (6). doi: 10.12691/ajme-4-6-1 Keywords: PHP, CLPHP, working fluid, filling ratio, inclination angle, thermal resistance, fin structure and without fin structure. Context: ...rs include the filling ratios (from 40% to 70% in steps of 10%), the inclination angles ( 0°, 30°, 45°, and 60°), and at various heat input (10 to 10W in the steps of 10W) has been investigated thoroughly. In this study CLPHP is made from long capillary copper tube with... Abstract Full Text (PDF) [Epub] Full Text (HTML)

5.

The Preliminary Heating at Welding Copper and Steel P. A. Gavrish American Journal of Materials Engineering and Technology. 2013 1 (3). doi: 10.12691/materials-1-3-4 Keywords: impulse source of heating, welding of copper with steel, welded details, microstructure, details fusion line Context: ...vity, linear expansion etc. In view of high heat conductivity of copper the most part of heat entered at welding is removed from heat input zone that leads to necessity of supply to a place of welding considerably a more heat, than at welding other metals. More rational... Abstract Full Text (PDF) [Epub] Full Text (HTML)

6.

Empirical Correlation for an Ammonia Charged Aluminum Closed Loop Pulsating Heat Pipe Md Shahidul Haque, Antara Majumdar, Md. Faisal Kader, Md. Mahbubur Razzaq American Journal of Mechanical Engineering. 2020 8 (1). doi: 10.12691/ajme-8-1-2 Keywords: pulsating heat pipe, heat input , fill ratio, empirical correlation Context: ...arch is to formulate an empirical correlation between overall heat transfer coefficient and different physical parameter such as heat input , evaporator temperature rise, fill ratios and inclinations. It has been found that the correlation is effective for heat input and... Abstract Full Text (PDF) [Epub] Full Text (HTML)