Gum Arabic (GA) collected from Acacia senegal trees was used with polyvinyl alcohol (PVA) to prepare a series biodegradable membranes. Great success was achieved for production of transparent bioplastic membranes by applying a novel casting method termed as free horizontal flow. The similarities between the six FTIR spectra in their principal peaks are due to their common functional groups. The broad pattern of the GA diffractogram obtained confirmed the amorphous nature of the GA, while the relatively sharpness of the PVA confirmed its semi-crystallinity.The crystallinity index (CI) values were increased with the increasing in the PVA allocation in the blend. Thermal degradation of the samples occurred at the higher temperatures (300-500°C) were greater than those for the lower temperatures (25-300°C). The PVA lost more weight than that for the GA at higher temperatures.The overall energy absorbed up to 500°C and subsequently thermal stability of the bioplastic membranes were increased as the PVA allocation in the blend is increased although the mass loss has the same trend. The GA membranes had the lowest nanometric particle size (NPS), while those for PVA had the highest ones. Increasing the PVA concentrations in the blends increased the NPS gradually. The bioplastic membranes were degraded by the isolated bacteria and fungi comparing with control samples. The major strains of isolated bacteria were Pseudomonas spp. and Bacillus spp., while Rhizobus spp was the major fungus. Addition PVA to GA enhanced the membranes formation and their properties such as crystallinity index, thermal stability and surface roughness.
| [1] | Badreldin H. A., Al-Husseni, I., Beegam, S., Al-Shukaili, A., Nemmar, A., Schierling, S., Queisser, N. and Schupp, N. 2013. Effect of gum Arabic on oxidative stress and inflammation in adenine–induced chronic renal failure in rats. PLoS One, 8(2): e55242.View Article PubMed |
| [2] | Williams, P. A., and Phillips, G. O. 2000. Handbook of Hydrocolloids. Williams, P. A., Phillips, G. O., Eds.; CRC Press, Cambridge, Elsevier. 2000. 155-168. |
| [3] | FAO Rome. 1990. Food and Nutrition. Food and Agriculture Organiztion, Rome: pp 49. |
| [4] | Wang, H., Williams, P. A., and Senan, C. 2014. Synthesis, characterization and emulsification properties of dodecenyl succinic anhydride derivatives of gum Arabic. Food Hydrocoll., 37: 143-148.View Article |
| [5] | Ali, B. H., Ziada, A., and Blunden, G. 2009. Biological effects of gum arabic: a review of some recent research. Food Chem. Toxicol., 47(1): 1-8.View Article PubMed |
| [6] | Verbeken, D., Dierckx, S., and Dewettinck, K. 2003. Exudate gums: occurrence, production, and applications. Appl. Microbiol. Biotechnol., 63(1): 10-21.View Article PubMed |
| [7] | Anderson, D. M. W., and Farquhar, J. G. K. 1982. Gum exudates from the genus Prosopis. International Tree Crops Journal, 2(1): 15-24.View Article |
| [8] | Anderson, D. M. W., McNab, C. G. A., Anderson, C. G., Brown, P. M., and Pringuer, M. A. 1983. Studies of uronic acid materials, Part 58: Gum exudates from the genus Sterculia (gum karaya). International Tree Crops Journal, 2(2): 147-154.View Article |
| [9] | Almuslet, N. A., Hassan, E. A., Al-Sherbini, A. A. M., Muhgoub, M. G. A. 2012. Diode laser (532 nm) induced grafting of polyacrylamide onto gum Arabic. Journal of Physical Science, 23: 43-53. |
| [10] | Randall, R. C., Phillips, G. O., and Williams, P. A. 1988. The role of the proteinaceous component on the emulsifying properties of gum Arabic. Food hydrocoll., 2(2), 131-140.View Article |
| [11] | Randall, R. C., Phillips, G. O., and Williams, P. A. 1989. Fractionation and characterization of gum from Acacia senegal. Food hydrocoll., 3(1), 65-75.View Article |
| [12] | Azzaoui, K., Hammouti, B., Lamhamdi, A., Mejdoubi, E., and Berrabah, M. 2014. The gum Arabic in the southern region of Morocco. Moroccan Journal of Chemistry, 3(1), Mor-J. |
| [13] | Elsabee, M. Z., Naguib, H. F., and Morsi, R. E. 2012. Chitosan based nanofibers, review. Mater. Sci. Eng., C, 32(7): 1711-1726.View Article |
| [14] | Pakravan, M., Heuzey, M. C., and Ajji, A. (2011). A fundamental study of chitosan/PEO electrospinning. Polym. J., 52(21), 4813-4824.View Article |
| [15] | Banerjee, S. S. and Chen, D.-H. 2007. Magnetic nanoparticles grafted with cyclodextrin for hydrophobic drug delivery. Chem. Mater., 19 (25): 6345-6349.View Article |
| [16] | Wilson Jr., O.C., Blair, E., Kennedy, S., Rivera, G., Mehl, P., 2008. Surface modification of magnetic nanoparticles with oleylamine and gum Arabic. Mater. Sci. Eng. C, 28: 438-442.View Article |
| [17] | Kattumuri, V., Katti, K., Bhaskaran, S., Boote, E. J., Casteel, S.W., Fent, G. M., Robert-son, D. J., Chandrasekhar, M., Kannan, R., Katti, K.V. 2007. Gum Arabic as a photochemical construct for the stabilization of gold nanoparticles: in vivo pharmacokinetics and X-ray-contrast-imaging studies. Small, 3: 333-341.View Article PubMed |
| [18] | Kumar, M.K., Reddy, A.L.M., Ramaprabhu, S., 2008. Exfoliated single-walled carbon notube-based hydrogen sensor. Sens. Actuators B, 130: 653-660.View Article |
| [19] | Park, C., Lim, K.H., Kwon, D., Yoon, T.H., 2008. Biocompatible quantum dot nanocolloids stabilized by gum Arabic. Bull. Kor. Chem. Soc., 29: 1277-1279.View Article |
| [20] | DeMerlis, C. C., and Schoneker, D. R. 2003. Review of the oral toxicity of polyvinyl alcohol (PVA). Food Chem. Toxicol., 41(3): 319-326.View Article |
| [21] | Razzak, M. T., and Darwis, D. 2001. Irradiation of polyvinyl alcohol and polyvinyl pyrrolidone blended hydrogel for wound dressing. Radiat. Phys. Chem., 62(1): 107-113.View Article |
| [22] | Masti S. P. and Chougale, R. B. 2014. Influence of Poly (Vinyl pyrrolidone) on Binary Blend Films Made from Poly (Vinyl Alcohol)/Chitosan. Inter. Res. J. Env. Sci., 3(3): 11-13. |
| [23] | Mudigoudra, B. S., Masti, S. P., and Chougale, R. B. 2012. Thermal behavior of poly (vinyl alcohol). Poly (vinyl pyrrolidone)/chitosan ternary polymer blend films. Research Journal of Recent Sciences, 1: 83-86. |
| [24] | Dos Reis E.F., Campos F.S., Lage A.P., Leite R.C., Heneine L.G., Vasconcelosc W.L., Portela Lobato Z.I. and Mansur H.S. 2006. Synthesis and characterization of poly (vinyl alcohol) hydrogels and hybrids for rMPB70 protein adsorption., Mat. Res., 9(2): 185-191.View Article |
| [25] | Nair, N. R., Nampoothiri, K. M., and Pandey, A. 2012. Preparation of poly (L-lactide) blends and biodegradation by Lentzea waywayandensis. Biotechnol. Lett, 34(11): 2031-2035.View Article PubMed |
| [26] | Liu, M., Guo, B., Du, M., and Jia, D. 2007. Drying induced aggregation of halloysite nanotubes in polyvinyl alcohol/halloysite nanotubes solution and its effect on properties of composite film. Appl. Phys. A , 88(2): 391-395.View Article |
| [27] | Limpan, N., Prodpran, T., Benjakul, S., and Prasarpran, S. 2012. Influences of degree of hydrolysis and molecular weight of poly (vinyl alcohol)(PVA) on properties of fish myofibrillar protein/PVA blend films. Food Hydrocoll., 29(1): 226-233.View Article |
| [28] | Karamanlioglu, M. 2013. Environmental degradation of the compostable plastic packaging material poly (lactic) acid and its impact on fungal communities in compost. PhD thesis, University of Manchester, UK. 198 PP. |
| [29] | Merugu, R. 2012. Studies on PHB (Polyhydroxybutyrate) degradation by some species of Aspergillus. Studies, 4 (3): 1111-1113. |
| [30] | Mergaert, J. Anderson, C. Wouters, A. Swings, J. and Kersters, K. F. E. M. S. 1992. Biodegradation of polyhydroxyalkanoates. FEMS Microbiology Letters, 103(2-4): 317-321.View Article |
| [31] | Onyari, J. M., Mulaa, F., Muia, J., and Shiundu, P. 2008. Biodegradability of poly (lactic acid), preparation and characterization of PLA/gum Arabic blends. Journal of Polymers and the Environment, 16(3): 205-212.View Article |
| [32] | Cozic, C., Picton, L., Garda, M. R., Marlhoux, F., and Le Cerf, D. 2009. Analysis of Arabic gum: Study of degradation and water desorption processes. Food Hydrocoll, 23(7): 1930-1934.View Article |
| [33] | Tiwari, A., Terada, D., and Kobayash, H. 2011. Polyvinyl modified guar-gum bioplastics for packaging applications. Handbook of Bioplastics and Biocomposites Engineering Applications, 24: 177.View Article |
| [34] | Volova, T. G., Boyandin, A. N., Vasil’ev, A. D., Karpov, V. A., Kozhevnikov, I. V., Prudnikova, S. V., and Gitel’Zon, I. I. 2011. Biodegradation of polyhydroxyalkanoates (PHAs) in the South China Sea and identification of PHA-degrading bacteria. Microbiology, 80(2): 252.View Article |
| [35] | Chen, J., Zhang, Y., Du, G. C., Hua, Z. Z., and Zhu, Y. 2007. Biodegradation of polyvinyl alcohol by a mixed microbial culture. Enzyme Microb. Technol. 40(7): 1686-1691.View Article |
| [36] | Rong, D., Usui, K., Morohoshi, T., Kato, N. O. R. I. H. I. R. O., Zhou, M., and Ikeda, T. S. U. K. A. S. A. 2009. Symbiotic degradation of polyvinyl alcohol by Novosphingobium sp. and Xanthobacter flavus. Journal of Environ. Biotechnol., 9(2): 131-134. |
| [37] | Abd Alla, F. A. A. 2012. The Effects of Microbiological biodegradation on gum Arabic structure and molecular mass (Doctoral dissertation, Sudan University of Science and Technology). |
| [38] | Nampoothiri, K. M., Nair, N. R., and John, R. P. 2010. An overview of the recent developments in polylactide (PLA) research. Bioresour. Technol., 101(22): 8493-8501.View Article PubMed |
| [39] | Gautam, N., and Kaur, I. 2013. Soil burial biodegradation studies of starch grafted polyethylene and identification of Rhizobium meliloti therefrom. Journal of Environmental Chemistry and Ecotoxicology, 5(6): 147-158. |
| [40] | Boyandin, A. N., Prudnikova, S. V., Filipenko, M. L., Khrapov, E. A., Vasil’ev, A. D., and Volova, T. G. 2012. Biodegradation of polyhydroxyalkanoates by soil microbial communities of different structures and detection of PHA degrading microorganisms. Appl. Biochem. Microbiol., 48(1): 28-36.View Article |
| [41] | Qiu, K., and Netravali, A. N. 2013a. A Composting study of membrane-like polyvinyl alcohol based resins and nanocomposites. Journal of Polymers and the Environment, 21(3), 658-674.View Article |
| [42] | Tang, Y., Zhou, D., and Zhang, J. 2013. Novel polyvinyl alcohol/styrene butadiene rubber latex/carboxymethyl cellulose nanocomposites reinforced with modified halloysite nanotubes. Journal of Nanomaterials, vol. 2013: 1-8.View Article |
| [43] | Abdalla, I. G. 2015. Enzymatic degradation and analysis of gum Arabic. PhD Thesis. University of Khartoum. |
| [44] | Nair, N. R., Nampoothiri, K. M., and Pandey, A. 2012. Preparation of poly (L-lactide) blends and biodegradation by Lentzea waywayandensis. Biotechnol. Lett, 34(11): 2031-2035.View Article PubMed |
| [45] | Hindi, S. S. Z. and Albureikan, M. O. 2017. Application of the free horizontal flow method for production of transparent biodegradable films from gum arabic. Patent under registraion. |
| [46] | Vinod, V. T. P. and Cerník, M., C. 2014. Tree gum based electropun nanofiber membranes: Process optimization, characterization and environmental application. Paper presented at Nanoconference Nov 5th – 7th, Brno, Czech Republic, EU. |
| [47] | Vinod, V. T. P., Nhung H. A. Nguyen, N. A. N., Ševcu, A. and Cerník, M. 2015a. Fabrication, characterization, and antibacterial properties of electrospun membrane composed of gum Karaya, polyvinyl alcohol, and silver nanoparticles. Journal of Nanomaterials. 2015(7): 1-12. |
| [48] | Vinod, V. T. P., Stanisław, W. and Miroslav, C. 2015b. Activated carbon nanofibers from gum kondagogu for remediation of toxic metals. Paper presented at the Nanoconference in Oct 14th – 16th held at Brno, Czech Republic, EU. |
| [49] | Ibrahim, M. S., Ibrahim, S. M. and Farag, S. A. 2007. Characterization, thermal, and mechanical behaviours of gamma irradiated gum Arabic/poly vinyl alcohol polymer blends. Polymer-Plastics Technology and Engineering, 46: 1143-1149.View Article |
| [50] | Falath, W., Sabir, A. and Jacob, K. I. 2017. Novel reverse osmosis membranes composed of modified PVA/gum Arabic conjugates: Biofouling mitigation and chlorine resistance enhancement. Carbohydrate Polymers, 155:28-39.View Article PubMed |
| [51] | Gupta, A. P. and Arora, G. 2011. Preparation and characterization of guar-gum/polyvinyl alcohol blend films. Journal of Materials Science and Engineering B1: 28-33. |
| [52] | Hindi, S. S. Z. 2017a. Suitability of date palm leaflets for sulphated cellulose nanocrystals synthesis. Nanoscience and Nanotechnology Research, 4(1): 7-16. |
| [53] | Hindi, S. S. Z. 2017b. Some crystallographic properties of cellulose I as affected by cellulosic resource, smoothing, and computation methods. International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET). 6 (1): 732-752. |
| [54] | Mostafa, H. M., Sourell, H., and Bockisch, F. J. 2010. Mechanical properties of some bioplastics under different soil types used as biodegradable drip tubes. Agricultural Engineering International: CIGR Journal, 12(1): 12-21. |
| [55] | El-Nakhlawy, F.S. 2008. Principles of statistics, biostatistical experimental design and analysis”. KAU Pub. Center. KSA. |
| [56] | Sismanoglu, T. et al. 2015. Preparation and characterization of antibacterial Senegalia (acacia) Senegal / iron - silica bio-nanocomposites, Applied Surface Science, 2015. 354: 250-255.View Article |
| [57] | Bouaziz, F.; Koubaa, M.; Barba, F.J.; Roohinejad, S.; Chaabouni, S.E. 2016. Antioxidant properties of water-soluble gum from flax seed hulls. Antioxidants. 5 (3): 26.View Article PubMed |
| [58] | Rathna, G. V. N., Jog, J. P., and Gaikwad, A. B. 2011. Development of non-woven nanofibers of egg albumen-poly (vinyl alcohol) blends: influence of solution properties on morphology of nanofibers. Polym. J., 43(7): 654-661.View Article |
| [59] | Bajpai, A. K.; Shukla, S. K.; Bhanu, S.; Kankane, S. 2008. Responsive polymers in controlled drug delivery. Progress in Polymer Science, 33(11): 1088-1118.View Article |
| [60] | Mori, T., Sakimoto, M., Kagi, T., and Sakai, T. 1996. Isolation and characterization of a strain of Bacillus megaterium that degrades poly (vinyl alcohol). Biosci., Biotechnol., Biochem., 60(2): 330-332.View Article PubMed |
| [61] | Jecu, L., Grosu, E., Raut, I., Ghiurea, M., Constantin, M., Stoica, A., and Vasilescu, G. 2012. Fungal degradation of polymeric materials: morphological aspects. http://www.inginerie-electrica.ro/acqu/2011/P_1_Fungal_degradation_of_polymeric_materials_Morfological_aspects.pdf. |
| [62] | Kawai, F. and Hu, X. 2009. Biochemistry of microbial polyvinyl alcohol degradation. Appl. Microbiol. Biotechnol., 84(2): 227-237.View Article PubMed |
| [63] | Mostafa, H. M., Sourell, H., and Bockisch, F. J. 2010. Mechanical properties of some bioplastics under different soil types used as biodegradable drip tubes. Agricultural Engineering International: CIGR Journal, 12(1): 12-21. |
