Figures index

From

Effect of Burnishing Forces on Turning Surfaces

Yaser A. Hadi

American Journal of Materials Engineering and Technology. 2019, 7(1), 1-6 doi:10.12691/materials-7-1-1
  • Figure 1. Principle of burnishing tool
  • Figure 2. Installation of burnishing tools on a lathe
  • Figure 3. Measuring of Surface roughness
  • Figure 4. Effect of burnishing feed on surface roughness for different burnishing force
  • Figure 5. Schematic representation of the burnishing process
  • Figure 6. Effect of burnishing speed on surface roughness at 0.088 mm/rev. feed rate
  • Figure 7. Effect of burnishing speed on surface roughness at 136N burnishing force
  • Figure 8. Effect of burnishing feed on roundness error at 48.24m/min burnishing speed
  • Figure 9. Effect of burnishing speed on roundness error at 0.088mm/rev. feed rate
  • Figure 10. Effect of burnishing speed on roundness error at 136N burnishing force
  • Figure 11. Surface roughness profile before and after burnishing