Figures index

From

Prediction Models by Response Surface Methodology for Turning Operation

Basim A. Khidhir, Waleed Al- Oqaiel, PshtwanMuhammed Kareem

American Journal of Modeling and Optimization. 2015, 3(1), 1-6 doi:10.12691/ajmo-3-1-1
  • Figure 1. Residual plot of surface roughness by second order prediction model
  • Figure 2. Surface roughness contours in the cutting speed-feed rate plane for depth of cut 2 mm
  • Figure 3. Surface roughness contours in the cutting speed-depth of cut plane for feed rate 0.2(mm/rev).
  • Figure 4. Surface roughness contours in the cutting speed-feed rate plane for cutting speed 300 m/min.
  • Figure 5. Residual plots for temperature for second order prediction model
  • Figure 6. Temperature contours in the cutting speed-feed rate plane for depth of cut 2 mm
  • Figure 7. Temperature contours in the cutting speed-depth of cut plane for feed rate 0.2 (mm /rev)
  • Figure 8. Temperature contours in the cutting speed-feed rate plane for cutting speed 300 m/min.