Figures index

From

Effects of Vegetable Oil Based Cutting Fluid in Machining Kevlar Composite Material

Md. Shoriat Ullah, Nikhil Ranjan Dhar

American Journal of Mechanical Engineering. 2018, 6(2), 54-60 doi:10.12691/ajme-6-2-3
  • Figure 1. The photographic view of experimental investigation
  • Figure 2. Photographic view of the drilled holes under different machining conditions
  • Figure 3. Roundness vs. No. of holes close to drill exit
  • Figure 4. The maximum, minimum and the average diameter at drill entry (a) and drill exit (b) under different conditions
  • Figure 5. (a) Variation of holes’ roughness (µm) under different conditions. (b) The maximum, minimum and the average value of roughness under different conditions
  • Figure 6. Photographic view of tool wear; (a) Dry condition (b) Cutting fluid (c) Vegetable oil (Olive oil)
  • Figure 7. Photographic view of chips