Figures index

From

Experimental Investigations of Surface Modification of AISI 1045 Die Steel by Electro Discharge Machining Process

Harjot Singh, S.S. Banwait

American Journal of Mechanical Engineering. 2016, 4(4), 131-141 doi:10.12691/ajme-4-4-2
  • Figure 1. Fabricated Cu-Cr Electrode
  • Figure 2. Edmed surface with Ip= 7.5 A,Ton= 15 µs, Toff = 150 µs, Cp= 800 MPa
  • Figure 3. Predicted Vs. Actual Surface Deposition Rate
  • Figure 4. Perturbation Graph of Surface Deposition Rate
  • Figure 5. Predicted Vs. Actual Surface Roughness Values
  • Figure 6. Perturbation Graph of Surface Roughness
  • Figure 7. Predicted Vs. Actual Values of Micro Hardness
  • Figure 8. Perturbation Graph of Micro Hardness
  • Figure 9. X-RAY Diffraction of EDMed Surface
  • Figure 10. SEM Microscopic view of the EDMed Surface