Figures index

From

Analysis of Influence of Strain Gage Rosette on Relieved Strain

Patrik Šarga, Peter Senko, František Trebuňa

American Journal of Mechanical Engineering. 2013, 1(7), 309-312 doi:10.12691/ajme-1-7-31
  • Figure 1. Strain gage rosette RY21
  • Figure 2. Model of the strain gage
  • Figure 3. Field of strain in the strain gage
  • Figure 4. Strain of the strain gage wires designed by theoretical calculation
  • Figure 5. Finite element mesh used for the model of strain gage rosette
  • Figure 6. Field of strains around the hole drilling
  • Figure 7. Strains in each strain gage wires designed using FEM
  • Figure 8. Comparison of strains in 3 wires
  • Figure 9. Model of the strain gage rosette with reinforcement
  • Figure 10. Comparison of strains in the three wires with and without reinforcement by strain gage rosette
  • Figure 11. Finite element mesh of the strain gage rosette
  • Figure 12. Changing of the deviation over the thickness of the plate
  • Figure 13. Effect of thickness of specimen on hardening by strain gage rosette