Figures index

From

Analysis of Failures of Leaf Springs on the Continuous Casting Machines

František Trebuňa, Jozef Bocko, František Šimčák, Marián Buršák

American Journal of Mechanical Engineering. 2013, 1(7), 304-308 doi:10.12691/ajme-1-7-30
  • Figure 1. Shape and dimensions of leaf spring
  • Figure 2. Locations of strain gages RY 61 for the hole-drilling method measurement
  • Figure 3. Residual stresses determined by ASTM E 837 01
  • Figure 4. Leaf spring with applied strain gages in tensile test machine
  • Figure 5. Time-dependent charts of stresses in locations 1,2,3,4
  • Figure 6. Leaf spring in a frame
  • Figure 7. Time-dependent charts of stresses in spring during frame vibration
  • Figure 8. Microstructure of tested material
  • Figure 9. Detail of microstructure of tested material
  • Figure 10. Schema of locations from which the specimens for fatigue tests were taken
  • Figure 11. Specimen for fatigue test
  • Figure 12. Fixation of test specimen in test machine PWY
  • Figure 13. Fracture surface of specimen 1
  • Figure 14. Fracture surface of specimen 2
  • Figure 15. Fracture surface of specimen 3