Figure 6. (a) Maximum Bending stresses for 5mm rim thickness pulley (b) Stress acting on arm for small rim thickness.(c) Stress acting on arm for larger rim thickness. (d)Stress acting on arm with bigger cross section. (e) Stress acting on arm with smaller cross section. (f) Stress acting on arm with optimized cross section

From

Effect of Rim Thickness on Load Sharing in the Rotating Elements

Rashmi Uddanwadiker

American Journal of Mechanical Engineering. 2013, 1(5), 126-130 doi:10.12691/ajme-1-5-4