Figure 11. Relative error of (group A: skirt without top/bottom thickness), (group B: skirt with top/bottom thickness), (group C: brim without top/bottom thickness and (group D: brim with a top/bottom thickness)

From

Influence of Multi-Level Printing Process Parameters on 3D Printed Parts in Fused Deposition Molding of Poly(lactic) Acid Plus: A Comprehensive Investigation

Mohammad S. Alsoufi, Mohammed W. Alhazmi, Dhia K. Suker, Wadeea K. Hafiz, Sultan S. Almalki, Rashad O. Malibari

American Journal of Mechanical Engineering. 2019, 7(2), 87-106 doi:10.12691/ajme-7-2-5