Figures index

From

Effect of HSS and Tungsten Carbide Tools on Surface Roughness of Aluminium Alloy during Turning Operation

Lawal S. A, Ahmed A. M, Lawal S.S, Ugheoke B.I

American Journal of Mechanical Engineering. 2016, 4(2), 60-64 doi:10.12691/ajme-4-2-3
  • Figure 1. Experimental set up
  • Figure 2. Surface roughness against cutting speed at feed rate of 0.2 mm/rev
  • Figure 3. Surface roughness against cutting speed at 0.4mm/rev feed rate
  • Figure 4. Surface roughness against cutting speed at 0.6mm/rev feed rate